Recently during some test on a CRT Television I found out my pattern generator is not working after many years of service. The switches on the panel were broken and also no signal was coming out of the equipment.
I opened up the machine and upon keep observation I noticed numerous dry joint and I re-soldered them and also replaced the broken keys and the machine came back to life.
This report is brought to you by Mr. Beh.
An electronics repairer based at Tehran in Iran
If you want to learn about this equipment and what it’s capable of doing click on the like below
HI MR KIMATHIReplyDelete
thank you so much of publishing a summary of my
repair report . ofcourse a complete report is available for any one that want to read more about this subject
Ok Mr.Beh,would you mind to drop your email here so that anyone who would like to contact you directly? otherwise thank you for your contributions in this blog..ReplyDelete