Sunday, April 1, 2012

Toshiba CF2033J TV repaired remotely courtesy of two techs one based in Nairobi Kenya and the other in Philippines



Hello Humphrey,
Here again your follower, TV repairer student, Romeo. About the TVs I was repairing earlier I set them aside due to unavailability of spare parts in our locality. I will go to Manila due soon to buy spare parts and do other things I supposed to do.


Now I am repairing another TV, this time it's my own TV, it is a Toshiba CF2033J.The unit is dead and no indication of power. I first check the voltage at the filter cap and showed nothing. I found numerous dry joints at the primary side of the power supply.

I re-soldered these joints and also found one defective electrolytic capacitor (33uF, 250 Volt) in the same line with filter cap. When I first power on the unit I forgot to use the series bulb limiter which I have made earlier as indicated from your eBook, however the unit opens normally, video and sound, but I found something not normal from the screen.

There is some rainbow like patterns from the screen and these one I like to consult with you what I can do to eliminate these 'patterns”. You can see the picture of the screen on the attached file I sent to you. 


The TV is connected with cable network. Local channels in our place are not so clear if I use outdoor antenna. In this case we opted to subscribe with the cable company in our place.

Please guide me again sir to further enhance my repair capability. Of course your eBook is my prime guidance in my repair session. Thanks again for your eBook.


Hi Romeo,
You have done a good job; I suggest you continue re-soldering all dry joints in that set, this time secondary side especially around the main Jungle ic and also the small CRT neck board.

I think that should be able to clear that problem, I don’t suspect a component failure for now.

Let me know how it turns out.

Regard Humphrey.



Hi Humphrey,
Thanks again for your guidance. Now the Toshiba TV is fine when I did what you've suggested.

5 comments:

  1. Congratulation for Sir Romeo for a job well done and thank you very much for Sir Humphrey for posting this repair.As a beginner we badly need this kind of info because not all troubles in tv were similar.Thank you again hoping for more post and info.God Bless us all...

    ReplyDelete
    Replies
    1. Hi Bogie, Thank you for your comment on this repair assignment. I agree with you that sometimes we get new challenges on the line of repair and that's why i encourage even my CRT book customers to came back here again on my blog to listen to other techs out there.
      Regards Humphrey

      Delete
  2. Hi sir Humprhey..how to buy your ebook?? I want to learn more about tv troubleshooting..

    ReplyDelete
  3. Congratulation Mr Romeo, Dear Sir, Humphrey for posting this repair.As a beginner we badly need this kind of info because not all troubles in tv were similar.Thank you again hoping for more post and info.God Bless you... even i Need your help, how to post here? My CRT TV is totally dead..... Please help me.....

    ReplyDelete
    Replies
    1. check out this link
      http://www.electronicsrepairmadeasy.com/2015/11/videocon-21-tv-is-not-turning-on.html
      Regards Humphrey
      you can use contact Humphrey form on my blog, usually i give support to buying customers though.

      Delete